Deep Space Atomic Clock Mission Will Improve Navigation Technology

A computer-aided design, or CAD, drawing of the linear ion trap of the clock -- the "heart" of the Deep Space Atomic Clock's physics package -- is slightly smaller than two rolls of quarters laid side by side. The DSAC project is a small, low-mass atomic clock based on mercury-ion trap technology that will be demonstrated in space, providing unprecedented stability needed for next-generation deep space navigation and radio science. Image credit: NASA/JPL

Precise radio navigation — using radio frequencies to determine position — is vital to the success of all deep-space exploration missions. To improve navigation technology, a small demonstration mission called the Deep Space Atomic Clock (DSAC) will fly as part of a future NASA mission in order to validate a miniaturized, ultra-precise mercury-ion atomic clock that is 100 times more stable than today’s best navigation clocks.

The mission is now being readied for its preliminary design review in 2013, and is scheduled to fly as a hosted payload on an Iridium NEXT spacecraft. Launch is set for 2015.

NASA says the DSAC demonstration will revolutionize the way deep-space navigation is conducted by enabling a spacecraft to calculate its own timing and navigation data in real time. This one-way navigation technology would improve upon the current two-way system in which information is sent to Earth, requiring a ground team to calculate timing and navigation and then transmit it back to the spacecraft. A real-time, onboard navigation capability is key to improving NASA’s capabilities for executing time critical events, such as a planetary landing or planetary “flyby,” when signal delays are too great for the ground to interact with the spacecraft during the event.

“Adopting DSAC on future NASA missions will increase navigation and radio science data quantity by two to three times, improve data quality by up to 10 times and reduce mission costs by shifting toward a more flexible and extensible one-way radio navigation architecture,” said Todd Ely, principal investigator of the Deep Space Atomic Clock Technology Demonstration at NASA’s Jet Propulsion Laboratory in Pasadena, Calif. The project is part of NASA’s Technology Demonstration Missions program, managed by the Marshall Space Flight Center in Huntsville, Ala., for NASA’s Office of the Chief Technologist in Washington.

The one-way deep space navigation enabled by DSAC uses the existing Deep Space Network more efficiently than the current two-way system, thus expanding the network’s capacity without adding any new antennas or their associated costs. This is important, since future human exploration of deep space will demand more tracking from the deep space network than can currently be delivered with the existing system.

“The Deep Space Atomic Clock flight demonstration mission will advance this laboratory-qualified technology to flight readiness and will make a practical atomic clock available to a variety of space missions,” Ely said.

Ground-based atomic clocks have long been the cornerstone of most space vehicle navigation because they provide root data necessary for precise positioning. DSAC will deliver the same stability and accuracy for spacecraft exploring the solar system. In much the same way that modern Global Positioning Systems, or GPS, use one-way signals to enable terrestrial navigation services, the Deep Space Atomic Clock will provide a similar capability in deep-space navigation — with such extreme accuracy that researchers will be required to carefully account for the effects of relativity, or the relative motion of an observer and an observed object, as impacted by gravity, space and time. Clocks in GPS-based satellite, for example, must be corrected to account for this effect, or their navigational fixes begin to drift.

In the laboratory setting, the Deep Space Atomic Clock’s precision has been refined to permit drift of no more than one nanosecond in 10 days, due to the work of NASA engineers at JPL. Over the past 20 years, they have been steadily improving and miniaturizing the mercury-ion trap atomic clock, preparing it to operate in the harsh environment of deep space.

The updated clock is a miniature mercury-ion atomic device the DSAC team will fly as a payload on an Earth orbiter in a one-year experiment to validate its operability in space and its usefulness for one-way navigation.

“A potential use for DSAC on a future mission would be in a follow-up to the Mars Reconnaissance Orbiter,” Ely said. NASA’s Mars Reconnaissance Orbiter launched to Mars in 2005 on a mission that included a quest to learn more about the distribution and history of Mars’ water – frozen, liquid or vapor. The orbiter completed its primary science phase in 2008 and continues to work in an extended mission. Atomic clocks are the most accurate timekeeping method known and are used as the primary standard for international time distribution services — to control the frequency of television broadcasts, and in global navigation satellite systems such as the Global Positioning System.

For more information, see the DSAC website.

Marshall Space Flight Center

Source:   Universe Today